Timers
Add your machines as timers. Nothing to buy, nothing to install.
- One resident can start alone — no manager coordination
- Cycle alerts instead of phone alarms
- Your own usage log
Timer mode — no hardware needed
Stop setting alarms for your laundry.
One list shows every machine — and LoDRY tells you when your cycle ends.
No hardwareOne resident can startiOS + web
WASHERS (2/2) · DRYERS (2/1)
Washing-2
Free
Washing-1
Probably free
Dryer-3
Busy
12 min left
Dryer-1
Finished
The app itself: one list, honest statuses. No sensor? It says Probably free — never a guess dressed as a fact.
Two ways to start
Same building, same app. Start free of hardware; upgrade only if measured status is worth it.
Sensors
Site review, then a qualified install. Status from real power readings.
- Confirmed Free, not probably
- Machine health signals for managers
- Timer buildings upgrade anytime
For you, and for the building
Short version — that's the point.
Residents · LoDRY
- Check before you walk down
- Alerts and a Live Activity timer — no alarms
- Report a problem, get a live reply
Managers · LoRUN
- Every machine, every tower, at a glance
- Tickets and notices in one place
- Usage history when you need proof
Pricing
Timers cost no hardware. Sensor plans are per building, per month.
Timer
No hardware cost
Start today. Software terms on request.
Sensor · Starter
$149 CAD/mo
Up to 4 machines.
Sensor · Professional
$189 CAD/mo
Up to 10 machines.
Portfolio
Custom
Multiple buildings.
Sensor hardware and installation are quoted after the site review. Optional SMS: $0.007 USD per message, Canadian numbers. A qualified building may be offered a three-month pilot, in writing. Pricing questions: sales [at] lorun.ca.
Four questions
The ones everyone asks.
Do we need sensors or hardware to start?
No. Timer mode needs none: residents start timers in the app and get alerts and a personal log. Sensors add measured status and health signals later.
Can one resident start without the manager?
Yes. Set up your building's timers, use them for yourself, invite neighbours. Manager features are there when the building adopts them.
Do residents need an account?
Live status can be viewed without one. Notifications, requests, and your history need a verified unit and Canadian phone number.
Can LoRUN predict a machine failure?
On sensor machines it flags unusual power patterns after learning a baseline — a signal to inspect, not a diagnosis.
Your building could be live today.
Timers take minutes. Tell us the building and the machine count.
Support: support [at] lorun.ca