For apartment buildings with shared laundry rooms

Your Laundry Room,
Smarter

Residents check machine status from their phone. SMS when cycles end. Managers get real-time oversight. No changes to existing machines.

Free for residents

5 min setup per machine

Works on any phone

Download LoDRY Download LoRUN

WASHERS

Energy

09:25~09:55

✓ Available

< 30s

notification delay

3 mo

free trial

machine modifications

Who Is This For?

Any building with shared washers and dryers that residents take turns using.

Apartment Buildings

Multi-unit residential with shared laundry floors

Condominiums

Strata-managed buildings with common facilities

Student Housing

Dorms & university residences with high turnover

Co-op Housing

Community-run buildings with shared resources

"Finally I don't have to walk down 3 floors just to check if a machine is free."

— Resident, Nicola Tower

Sound Familiar?

Problems that cost time, cause complaints, and make shared laundry rooms frustrating.

Walking down to check

Residents go to the laundry room just to see if a machine is free — and it often isn't.

Forgotten laundry blocks everyone

Clothes sit in done machines for hours. Others wait frustrated. Nobody knows whose it is.

No visibility for managers

You don't know which machines break, what peak hours are, or who causes problems.

Complaints with no channel

Residents text, email, or knock on doors. Issues pile up without tracking or resolution.

Peak hour chaos

Everyone does laundry at the same time. No way to know the best free slots without physically checking.

Breakdowns go unreported

Machines break and sit idle for days. No one reports it properly. Manager finds out too late.

We solve all of it — plug in a smart relay and you're live.

Works With Every Machine

Any brand, any age, any type — because it monitors the outlet, not the machine.

No vendor lock-in — replace machines anytime

Mixed fleet OK — different brands, ages, types

Future-proof — upgrade machines, monitoring stays

Zero machine mods — relay monitors the outlet

What Building Managers Achieve

Real, measurable results from day one — energy savings, fewer complaints, and full visibility.

Energy Management & Cost Reduction

More than monitoring — it's an energy optimization tool

The system tracks when each machine runs and which hours see heaviest usage. Tenants see "Best Times to Wash" based on real data — naturally shifting load off-peak. Peak demand flattens, and your electricity bill goes down.

15-25%

Peak demand reduction

$$$

Lower BC Hydro charges

ESG

Green credentials

💡 Real Example: If 80% of tenants wash between 6-9 PM, your building hits a demand spike BC Hydro charges you for all month. By showing tenants that Tuesday 10 AM has zero wait time, usage naturally spreads out — no restrictions, just smart nudging with information.

70-80% Fewer Complaints

Tenants check status from their unit. No wasted trips. SMS notifications prevent forgotten laundry blocking others.

3-4 Hours/Week Saved

No more checking complaints manually, coordinating maintenance calls, or answering "is a machine free?" — it's all automated.

Instant Breakdown Detection

Instead of 3-5 days before someone reports a broken machine, the system auto-detects offline machines and alerts you immediately.

100% Full Visibility Dashboard

Live machine status, peak hours, total cycles, maintenance tickets, registered tenants — all from one dashboard across all buildings.

3x Return on Investment

Preventing 1 early lease termination/year ($3,000-5,000 cost) pays for the system 3x over. Smart amenities signal modern management.

All Communication in One Place

No more scattered emails and sticky notes. Ticket system, building notices, and SMS alerts — all in one dashboard.

What Residents Get

Everything they need — no account, no download required.

Live Machine Status

Available, Running, or Done — updated in real-time. No refresh needed.

🫧 Your washer is done!

SMS Notifications

Text message when your cycle ends. Works on any phone — no app needed.

QR Code & NFC

Scan the code on any machine — subscribe instantly. NFC tags too.

Visual Countdown

Ring timer shows remaining time. Overtime mode if cycle runs long.

Machine 2 is dirty

Thanks, we'll clean it

Report Issues

Submit tickets. Chat with management directly. Get responses.

Usage Insights

Weekly stats, best times to wash, busiest hours — plan smarter.

What Managers Get

Full control panel with real-time data and communication tools.

Dashboard Overview

See all machines at a glance. Which are running, who's using them, how long.

👤

Washer 3 leaking water

Maintenance scheduled ✓

🔧

Ticket Conversations

Residents report issues, you reply. Full thread. SMS alerts on new tickets.

Send Notices

Broadcast announcements to all units or message specific residents.

Smart State Detection

IoT monitors power usage. Automatically knows when machines start and finish.

Simple, Transparent Pricing

One-time hardware + monthly platform. No hidden fees. Cancel anytime.

Monthly

Annual Save 5%

Starter

$149/mo

Up to 2 sets (4 machines)

Real-time monitoring
SMS notifications included
Resident dashboard
Ticket system
Up to 100 residents
Email support

Get Started

ProfessionalPOPULAR

$189/mo

Up to 5 sets (10 machines)

Everything in Starter
Up to 10 machines
Usage analytics & reports
Building notices
Up to 500 residents
Priority support

Get Started

Enterprise

$249/mo

6+ sets (unlimited machines)

Everything in Professional
Unlimited machines
Multi-tower management
Custom branding
Unlimited residents
Dedicated support

Start Free for 3 Months

Full platform access. No credit card. No commitment. See the value before you pay.

Cancel anytime

All features included

💰 Pay annually = 5% off

Hardware Packages

One-time cost. Includes IoT smart relay + professional installation.

Sets	Machines	Relay Units	Price (CAD)
1 set (1W + 1D)	2	1	$550
2 sets	4	2	$950
3 sets	6	2	$1,100
4 sets	8	3	$1,450
5 sets ⭐	10	4	$1,800
6 sets	12	4	$2,000
8 sets	16	6	$2,800
10 sets	20	7	$3,300

Compact panel installation

Industrial grade hardware

Professional electrician install included

Each smart relay monitors multiple channels. 1 set = 2 channels (washer + dryer). Remaining channels used for total power monitoring.

Return on Investment

This system pays for itself — fast.

💰 Manager Time Saved

3 hours/week × $25/hr = $300/month saved in staff time alone. That's 2x the Starter plan cost.

🏠 Tenant Retention

Preventing 1 early lease termination/year (cost: $3,000-5,000) pays for the entire system 3x over.

⚡ Energy Savings

15-25% peak demand reduction means lower BC Hydro demand charges every month — compounding over time.

Cost Per Unit in Your Building

$2.98/unit (50 units)

$0.99/unit (150 units)

$0.47/unit (400 units)

Setup in 4 Steps

From zero to live in under 30 minutes for a typical laundry room.

Buy Smart Relays

~$300 each (industrial-grade IoT relay). One per machine.

Plug into machines

Between the wall outlet and the machine. No wiring changes.

Connect to WiFi

Smart relay connects to your building WiFi. Automatic cloud sync.

Print QR codes

Stick on each machine. Residents scan and they're live.

Ready to modernize your laundry room?

We'll help you get set up. Free consultation.

WhatsApp Us

Zero Hassle Maintenance

We handle the tech. You handle the building. Here's what goes where.

We Handle

Software updates (automatic)

24/7 platform monitoring

Unlimited SMS notifications

Bug fixes & new features

Technical support (Email + WhatsApp)

You Handle

Keep WiFi connected

Reply to tenant tickets (optional)

Replace relay if damaged (~$80, rare)

What If Something Goes Wrong?

📶

WiFi goes down

Machines work normally. Updates resume when WiFi returns.

⚡

Power outage

Everything resets automatically. No action needed.

🔧

Relay failure

Machine shows "offline". Replace for $80. Expected 5+ yr lifespan.

📱

QR code damaged

Print a new one for free. Other QR codes still work.

No moving parts. Solid-state electronics. 5+ year expected hardware lifespan.

Get the Apps

iOS native app or web — both work perfectly.

🫧

LoDRY

For residents

Download on App Store or open web version →

⚙️

LoRUN

For building managers

Download on App Store or open web version →

Why Now?

Vancouver's rental market is evolving. Buildings that modernize now win.

🏆

Stand Out in Listings

"Smart Laundry Monitoring" is a real amenity highlight that attracts modern tenants.

📉

Reduce Headaches Early

Fix laundry complaints before they compound across your entire portfolio.

🔒

Lock In Early Pricing

As we grow, pricing increases for new customers. Current rates are locked for you.

Limited Time Offer

Start Free for 3 Months

Full platform access. No credit card. No commitment. See the value with your actual tenants before you pay a cent.

Cancel anytime

All features included

No credit card

Get Started Free →

15-min consultation • Installation within days • Zero risk

What's Coming Next

All future features are included in your existing plan — no upsells, no tier upgrades.

Coming Soon Q1 2027

Tap-to-Pay (Apple Pay / Google Pay)

Revenue Reporting Dashboard

Advanced Energy Reports

Smart Nudging (optimal wash times)

In Development Q3 2027

Predictive Maintenance (AI)

Multi-Language (中文, ਪੰਜਾਬੀ, FR)

Android App

Portfolio Energy Dashboard

Future Vision 2028

BC Hydro Demand Response Integration

Property Management Integration

Water Leak Detection

Amenity Expansion (EV, Gym, Packages)

Questions?

Is it free for residents?+

Yes, completely free. No account needed. Scan the QR code, enter your unit number, done. SMS notifications are free too.

Do I need to install an app?+

No. The web version works in any browser. The iOS app is optional — gives smoother deep links when scanning QR codes.

How does it know when my laundry is done?+

A smart plug between the wall and machine monitors power usage. When power drops (cycle ends), you get an SMS within 30 seconds.

Does it work with any washer/dryer brand?+

Yes. It monitors power from the outlet — brand, model, or age of machine doesn't matter. Works with any appliance that plugs into a standard outlet.

What does the building manager need to pay?+

Hardware is ~$300 per machine (industrial-grade IoT smart relay). The platform itself is available for qualified buildings. Contact us for details.

Your Laundry Room,
Smarter

Who Is This For?

Sound Familiar?

Works With Every Machine

What Building Managers Achieve